Installation guide

Administrator Level Options
3-2 41-001561-00 REV00 – 10.2014
Administrator Level Options
Description
There are options on the IP phone that both a User and Administrator can access. However, there are specific options
that an Administrator can access only. These options allow the Administrator to configure and manage local and/or
remote IP phones in a network.
An Administrator can access and manage these options using the IP Phone UI, the Mitel Web UI, or the configuration
files.
IP Phone UI Options
Using the 6863i/6865i IP Phone UI, you can access the Administrator options at Options > Admin Menu using the
default password of "22222"
The following are administrator options in the "Options List" on the 6863i and 6865i:
• Administrator Menu
– Configuration Server
– SIP Settings
– Network Settings
– Factory Default
– Erase Local Config
The 6867i and 6869i have an “Advanced” softkey, which when pressed and password entered gives access to the Admin-
istrator options.
The following are administrator options in the "Options List" on the 6867i and 6869i:
• Advanced Menu
– Configuration Server
– SIP Settings
– Network Settings
– Reset (includes options for “Erase Local Config” and “Factory Default”
)
Note:
An administrator has the option of enabling and disabling the use of password protection on the IP phone UI for all
model phones. This is configurable using the configuration files only. For more information about this feature, see
Appendix A, the section “Password Settings” on page A-13
6867i Mitel SIP Phone
Administrator Menu
6869i Mitel SIP Phone