Installation guide
41-001561-00 REV00 – 10.2014 3-1
Chapter 3
Administrator Options
About this Chapter
The IP phones provide specific options on the IP Phone that only an Administrator can access. These options are password
protected and allow an Administrator to change or set features and configuration information as required. For all models,
an Administrator can use the IP Phone UI, the Mitel Web UI, or the configuration files to enter and change values.
This chapter provides information about the available Administrator options.
Topics
This chapter covers the following topics:
Note:
Specific options are configurable only via the IP Phone UI, and/or Mitel Web UI, and/or configuration files.
Top ic Page
Administrator Level Options page3-2
IP Phone UI Options page3-2
Mitel Web UI Options page3-4
Configuration File Options page3-6
Phone Status page3-6
Restarting Your Phone page3-9
Set Phone to Factory Defaults/Erase Local Configuration page3-10
Basic Settings page3-12
Account Configuration page3-23
Custom Ringtones page3-24
Network Settings page3-24
Line Settings page3-40
Softkeys, Programmable Keys, Expansion Module Keys page3-41
Action URI page3-41
Configuration Server Settings page3-43
Firmware Update Features page3-46
TLS Support page3-47
802.1x Support page3-49
Troubleshooting page3-50