Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-55
Screen Saver Settings
Picture ID Feature
Note:
Applicable to the 6867i and 6869i IP Phones only.
Parameter–
screen save time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the amount of time (in seconds) the phone must be idle before the
6867i/6869i IP phone’s screen saver initiates.
Format Integer
Default Value 1800 (seconds)
Range 0 (disabled) - 7200
Example screen save time: 240
Note:
Applicable to the 6867i and 6869i IP Phones only.
Parameter –
image server uri
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify the server URI where pictures are stored for display to the phone
during incoming and outgoing calls, and in the Directory, Callers List, and Redial List
entries. The pictures are dynamically retrieved from the centralized server for each call
and then locally cached in the phone to reduce network traffic.
If there is no picture on the central server for the dialed number and/or Caller Id number,
and Directory, Callers List, and/or Redial List entry, the generic blue figure image is
shown.
Pictures must be in “.png” format and 150pixels wide x 200pixels tall. For the 6867i/6869i,
the png can be 24-bit or 32-bit. The filenames for pictures must be stored using the
phone number as the filename (for example, 9995551234.png).
Notes:
• Entering no value for this parameter disables this feature.
• The “image server uri” parameter supports TFTP, FTP, HTTP, andHTTPS.
Format Server URI String
Default Value N/A
Range N/A
Example image server uri: tftp://192.168.1.100