Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-11
DHCP Option Settings
Option 12
Option 60
Option 77
Parameter–
hostname
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the hostname DHCP Option 12 that the phone sends with the DHCP Request
packet.
Note:
If you change this parameter, you must restart your phone for the change to take affect.
Format String
Default Value [<model><MAC IP Address>]
Range Up to 64 alpha-numeric characters
Note:
The value for this parameter can also be a fully qualified domain name.
Example hostname: aastra4
Parameter–
dhcp opt60 extended vendor
class
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies whether to send a DHCP Option 60 value consisting of the identifier value only, or
an extended DHCP Option 60 value consisting of the identifier, firmware version, and boo-
trom version. If the latter, the syntax is as follows:
“Identifier Value + Firware Version + BootRom Version”
Format Integer
Default Value 0 (Disabled)
Range 0-1
0 (Disabled - Sends only the identifier value)
1 (Enabled - Sends the identifier value, firmware version, and bootrom version)
Example dhcp opt60 extended vendor class: 1
Parameter–
dhcp userclass
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the User Class DHCP Option 77 that the phone sends to the configuration server
with the DHCP Request packet.
Note:
If you specify a value for this parameter, you must restart your phone for the change to take
affect. Any change in its value during start-up results in an automatic reboot.
Format String
Default Value ““
Range Up to 64 alpha-numeric characters
Example dhcp userclass: admin