Installation guide

Operational, Basic, and Advanced Parameters
A-10 41-001561-00 REV00 – 10.2014
Parameter –
ethernet port 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 1 to transmit and
receive data over the LAN.
Format Integer
Default Value 0
Range 0 - Auto Negotiate
1 - Full Duplex, 10Mbps
2 - Full Duplex, 100Mbps
3 - Full Duplex, 1000Mbps (applicable for 6865i, , 6867i, and 6869i IP phones only)
4 - Half Duplex, 10Mbps
5 - Half Duplex, 100Mbps
6 - Half Duplex, 1000Mbps (applicable for the 6865i, , 6867i, and 6869i IP phones only)
Example ethernet port 1: 2
Parameter –
pc port passthru enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the PC port.
Format Integer
Default Value 1 (enable)
Range 0 (disable)
1 (enable)
Example pc port passthru enabled: 1