Installation guide

Operational, Basic, and Advanced Parameters
41-001561-00 REV00 – 10.2014 A-7
Simplified IP Phone UI Options Menu
Network Settings
Parameter –
options simple menu
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to enable a simplified options menu or enable the full menu on the IP Phone
UI.
Warning: When using the simplified menu, you cannot change the Network settings
from the IP Phone UI. If the network settings become mis-configured, you must “factory
default” the phone and use the full menu to recover the network settings from the Phone
UI OR use the Mitel Web UI to configure the network settings.
Format Boolean
Default Value 0 (full options menu)
Range 0 (full options menu)
1 (simplified options menu)
Example options simple menu: 1
Parameter –
dhcp
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables DHCP. Enabling DHCP populates the required network information.
The DHCP server serves the network information that the IP phone requires. If the IP
phone is unable to get any required information, then you must enter it manually. DHCP
populates the following network information:
IP Address, Subnet Mask, Gateway, Domain Name System (DNS) servers, TFTP, HTTP, HT TP
Port, HTTPS, HTTPS Port, and FTP servers, and Timer servers.
Note:
For DHCP to automatically populate the IP address or qualified domain name for the
TFTP server, your DHCP server must support Option 66.
Format Integer
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example dhcp: 1