Installation guide

Configuration Methods
2-8 41-001561-00 REV00 – 10.2014
Operation
The Operation section provides the following options:
Heading Description
User Password Allows you to change user password.
(Applicable to User and Administrator)
Phone Lock Allows you to assign an emergency dial plan to the phone, lock the phone to prevent any changes to the phone
and to prevent use of the phone, and reset the user password.
Note:
You can also configure a softkey to use for locking/unlocking the phone.
(Applicable to User and Administrator)
Softkeys and XML 6867i - 6 Top, multi-functional, static softkeys / 4 Bottom, state-based, multi-functional softkeys
6869i - 12 Top, multi-functional, static softkeys / 5 Bottom, state-based, multi-functional softkeys
(Applicable to User and Administrator)
Programmable Keys 6863i - 3 multi-functional, programmable keys
6865i - 8 multi-functional, programmable keys
(Applicable to User and Administrator)
Expansion Module <N> The M680i has up to 16 configurable keys. The M685i has up to 84 configurable keys. You can have up to 3 expan-
sion modules attached to a single phone allowing you to configure keys for Expansion Module 1, Expansion Mod-
ule 2, and Expansion Module 3. See your <Model-Specific> IP Phone User Guide for applicable expansion mod-
ules for your model phone.
Note:
M680i and M685i Expansion Modules apply to the 6865i, 6867i, and 6869i only.
(Applicable to User and Administrator)
Keypad Speed Dial Allows you to configure up to 9 speeddial keys. These fields map to the keypad digits 1 through 9 on the phone.
You can also configure additional speeddials on the programmable keys, softkeys and expansion modules. See
your <Model-Specific> IP Phone User Guide for more information about this feature.
(Applicable to User and Administrator)
Directory Allows you to copy the Callers List and Local Directory List from your IP phone to your PC.
(Applicable to User and Administrator)
Reset Allows you to restart the IP phone when required. (Applicable to User and Administrator).
This setting also allows you to set the IP phone back to its factory default settings or remove the local configura-
tion. (Applicable Administrator only)