Installation guide

Troubleshooting
9-6 41-001561-00 REV00 – 10.2014
Mitel Web UI
1. Click on Advanced Settings->Troubleshooting.
To set log settings:
2. In the "Log IP" field, enter the IP address of the log server (i.e. the server to which log information will be transmitted).
3. In the "Log Port" field, enter the port number associated with the IP address specified in the "Log IP" field. This port passes the information
from the IP phone to the IP address location.
4. Click Save Settings to save your settings.
5. Click on Operation->Reset.
6. In the "Restart Phone" field click Restart to restart the IP phone.
To set blog modules:
7. Select the applicable module.