Installation guide

Configuration Methods
41-001561-00 REV00 – 10.2014 2-7
Depending on the model phone you are accessing, the following categories display in the side menu of the Mitel Web UI:
Status, Operation, Basic Settings, Advanced Settings.
Status
The Status section displays the network status and the MAC address of the IP phone. It also displays hardware and
firmware information about the IP phone. The status window also displays the SIP Account information for each account
on the phone. The information in the Status window is read-only.
2. Enter your username and password and click OK.
Note:
For an administrator, the default username is “admin” and the password is “22222”.
For a user, the default username is “user” and the password field is left blank.
The IP phones accept numeric passwords only.
The Status window displays for the IP phone you are accessing. The following illustration is an example of a Status screen for the 6867i IP
phone
.
3. You can logout of the Mitel Web UI at any time by clicking Log Off.
Note:
Programmable Keys apply to the 6863i and 6865i. Softkeys apply to the 6867i, and 6869i. Expansion Modules apply to
the 6865i, 6867i, and 6869i only.