Installation guide

Upgrading the Firmware
8-4 41-001561-00 REV00 – 10.2014
Using the Restart Feature
Restarting the phone forces the phone to check for both firmware and configuration files stored on the configuration
server.
Restarting the Phone Using the IP Phone UI
Restarting the Phone Using the Mitel Web UI
Warning!
Do not reset or turn off the phone until the download is complete.
IP Phone UI
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2. Select Restart Phone.
3. Press # to confirm.
Note:
To cancel the Restart, press the 3 key.
For the 6867i/6869i:
1.
Press on the phone to enter the Options List.
2. Select Restart. The following prompt displays:
“Restart phone?”
3. Select Ye s or press the Restart softkey to restart the phone
or
Select No or press the Cancel softkey to go back to the Options Screen.
Mitel Web UI
1. Click on Operation->Reset->Phone.
2. Click Restart to restart the phone.