Installation guide
Advanced Operational Features
41-001561-00 REV00 – 10.2014 6-46
This visitor account is the default account that the phone uses when a user is not logged in his/her specific account. In the
above configuration example, the user would see the following initial screen:
Configuring the User Configuration Server URL
Use the following parameter to configure the user configuration server URL:
Logging In and Out
For logging in and logging out, a NOTIFY message containing an XML body that includes the parameter “hot desk user-
name” with a valid username value to the phone must be triggered. The method of triggering this NOTIFY message can be
phone-initiated (by configuring a “Login” key) or initiated through a different method (e.g. through use of an Interactive
Voice Response [IVR] system).
To log in to a specific user profile, the user could, if configured, press the “Login” key on the phone or call an IVR set up for
the VDP log in/log out process (or any other alternative method configured).
If the “Login” key is pressed, the phone will prompt the user for the username and password. If the server does not support
authentication or if the server is set up for anonymous connections, the username is all that is required and corresponds to
the filename of the <user>.cfg file (e.g. john). If the server is configured with login credentials, both the username and
password are required. The username in this case corresponds to both the server username credential and <user>.cfg file
(i.e. the server username and <user>.cfg file name must match) and the password corresponds to the server password cre-
dential.
When the user’s credentials are confirmed, this triggers the call manager to send an unsolicited NOTIFY message contain-
ing an XML body that includes the parameter “hot desk username” with a valid value to the phone. The phone then con-
tacts the configuration server (defined by the “user config url” parameter) and downloads the subscribers profile con-
tained in the “<user>.cfg” and “<user>_local.cfg” files.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section, “Visitor Desk Phone Settings” on pageA-237.
Note:
The “<user>.cfg” file contains read-only server-related configuration information that is not configurable by the user
and the “<user>_local.cfg” file contains the user configuration information that has been changed by the user locally
either through the phone’s UI or through the Web UI.
6867i Visitor Account Example
6869i Visitor Account Example
6863i/6865i Visitor Account Example
Visitor
12 Jul 12:49pm
L1