Installation guide
Advanced Operational Features
6-45 41-001561-00 REV00 – 10.2014
Use the following procedure on the phone’s UI to enter user credentials and test the connection to the XSI server.
Visitor Desk Phone Support
General Overview and Configuration
A Visitor Desk Phone (VDP) feature has been implemented allowing users the ability to log in to any VDP-configured
phones and thus use that respective phone as his/her personal device for the duration of the logged in session.
Using the “aastra.cfg”, “<mac>.cfg”, or “<model>.cfg” file, Administrators can provision each of the respective phones
with a generic visitor account that has been configured for the specific environment and then simply define the “user
config url” parameter, which specifies the configuration server URL where the <user>.cfg is located when utilizing the
Visitor Desk Phone (VDP) feature.
For example, the respective configuration file for a simple visitor account could contain the following:
sip auth name: 5000
sip display name: Acme Inc.
sip password: 12345
sip proxy ip: 100.200.50.60
sip proxy port: 5060
sip registrar ip: 100.200.50.60
sip registrar port: 5060
sip screen name: Visitor
sip user name: 5000
sip dtmf method: 1
user config URL: http://100.200.50.79/vdp/
IP Phone UI
1.
Press on the phone to enter the Options List.
2.
Navigate to the Credentials option and press the button or Select softkey.
3. Use the 4 key to navigate to the BroadSoft XSI tab.
4. Press the 2 key to highlight the Username field and using the dialpad keys (or K680i Keyboard if available) enter in your username.
5. Press the 2 key to highlight the Password field and using the dialpad keys (or K680i Keyboard if available) enter in your password.
6. Press the 5 key to navigate back to BroadSoft XSI tab, and press the 4 key to until you get to the Test Connection tab.
7.
Press the 2 key to highlight BroadSoft XSI and press the button to enable testing on that source.
8. Press the Test softkey to begin testing.
A green
will appear if there are no issues with the connection to the server.
A red
! will appear if issues are found.
If there are issues with your connection, please check your username, password, and/or server configuration.
9. Press the Save softkey to save your changes.