Installation guide
Advanced Operational Features
41-001561-00 REV00 – 10.2014 6-44
Administrators also have the added option of configuring a Speed Dial 8 softkey by defining the “softkeyN type” or “top-
softkeyN type” parameter as “speeddial” and “softkeyN value” or “topsoftkeyN value” to “xsi.speeddial8” in the respec-
tive configuration file.
Enabling XSI Speed Dial 8 and Call Log Support Using the Configuration Files
You use the following parameters to enable XSI Speed Dial 8 and Call Log support:
Entering Usernames/Passwords and Connection Testing
Before the BroadSoft XSI Speed Dial 8 and Call Log services can be utilized, user credentials (i.e. username and password)
for BroadSoft XSI will need to be entered using the phone’s UI by navigating to the Options > Credentials menu. This menu
also allows users to test their connection to the XSI server.
Mitel Web UI
1. Click on Operation->Softkeys and XML.
2. Select from Key 1 through Key 20 (6867i) or Key 44 (6869i) on the top keys
or
Select from Key 1 through Key 18 (6867i) or Key 24 (6869i) on the bottom keys.
3. In the Type field, select Speeddial to apply to the key.
4. (Optional) In the Label field, enter a label to apply to this key.
5. In the Value field, enter “xsi.speeddial8”.
6. (Optional) In the Line field, select a line to apply to this key. Valid values are 1 through 9.
7. Click Save Settings.
Notes:
• Speed Dial 8 softkey Label and Line values are optional.
• For details on how to configure speeddial softkeys using the configuration files see
Softkey Settings on page A-175
and Top Softkey Settings on page A-187.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section, “XSI Speed Dial 8 and Call Log Settings” on pageA-235.