Installation guide
Advanced Operational Features
41-001561-00 REV00 – 10.2014 6-42
Use the following procedure in the configuration files to configure the active VoIP recording feature.
BroadSoft XSI Speed Dial 8 and Call Log Support
Interoperability support for the BroadSoft XSI Speed Dial 8 service has been introduced for the 6867i and 6869i IP phones.
When the respective speed dial information is configured on the BroadSoft BroadWorks call manager and the phone is
configured for XSI interoperability, users can simply place an outgoing call to a speed dial number by pressing the Speed
Dial 8 softkey and then pressing and holding the corresponding speed dial key on the dialpad. Alternatively, users can
select the desired number using the navigation keys and then press the Dial softkey,
button, Line button, but-
ton, or simply pick up the handset.
In addition to Speed Dial 8, the BroadSoft XSI Call Log service is interoperable with the 6867i and 6869i IP phones. When
configured on the BroadSoft BroadWorks call manager and enabled on the phone, the phone’s native Callers List and
Redial List are replaced with call information provided by the XSI server.
The Callers List will show the name and number of the incoming caller, the date and time of the call, as well as if the call
was missed or received. Users are able to copy an entry to the Local Directory or edit an entry in the Callers List using the
Copy and Edit softkeys exactly the same way as in the phone’s native Callers List.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section, “Active VoIP Recording Settings” on pageA-234.
Note:
Applicable to the 6867i and 6869i IP Phones only.
6869i Example: Speed Dial 8 Menu
6869i Example: XSI Call Logs Callers List