Installation guide
Advanced Operational Features
6-41 41-001561-00 REV00 – 10.2014
Moreover, the phone will, by default, play a periodic audible beep tone through the selected audio path notifying users
that their call is being recorded. Playback of the beep tone is configurable and if required, administrators can disable or
set the playback interval of the beep tone by defining the “recording periodic beep” parameter in the configuration
files. Additionally, by utilizing the “recording beep direction“ parameter, administrators can define whether the beep
tone is audible locally, remotely, or both.
Warning!
The recording icon is displayed on the IP phones to indicate the recording session is active and that a duplicate copy
of the RTP/SRTP stream is to be sent from the phone to the recording server. The overall recording and its quality is
dependent on the recording server and the network.
Note:
In addition to the aforementioned parameters corresponding to the active IP voice recording feature, the transport pro-
tocol parameters for SIP services (i.e. “sip services transport protocol” and “sip services port”) must also be defined in
the configuration files. See “Configurable Transport Protocol for SIP Services and RTCP Summary Reports” on page6-38
for more information.
6867i
Normal Call
Conference Call
Recording Icons
6869i
Normal Call
Conference Call
Recording Icons