Installation guide

Advanced Operational Features
41-001561-00 REV00 – 10.2014 6-22
Configuring the 802.1x Protocol Using the Mitel Web UI
Use the following procedure to configure the 802.1x Protocol on your phone using the Mitel Web UI.
Mitel Web UI
1. Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2. In the “EAP Type” field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3. In the “Identify” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
4. In the “MD5 Password” field, enter a password used for the MD5 authentication of the phone.
For example, password1.
5. Click Save Settings to save your changes.
To configure EAP-TLS:
1. Click on Advanced Settings->802.1x Support.
1. In the “EAP Type” field, select EAP-TLS.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
2. In the “Identity” field, enter an Identity for the IP phone for which you are configuring 802.1x.
For example, phone1.
3. In the “Root and Intermediate Certificates Filename” field, enter the filename that contains the root and intermediate certificates related
to the local certificate. For example: root_Intermed_certifi.pem.
4. In the “Local Certificate Filename” field, enter the filename that contains the local certificate. For example: localcertificate.pem.
5. In the “Private Key Filename” field, enter the filename that contains the private key. For example: privatekey.pem.