Installation guide

Operational Features
5-229 41-001561-00 REV00 – 10.2014
Per-Line Configuration
1. Click on Advanced Settings->Line <#>->Basic SIP Network Settings
2. In the “Conference Server URI” field, do one of the following actions:
• To disable centralized conferencing on this line, leave this field empty (blank).
• To enable SIP centralized conferencing on this line, do one of the following actions:
– If you have specified a proxy server/registrar server, then to reach the media server via the proxy server, set this field to one of the fol-
lowing:
conf (Sylantro server), or
Conference (BroadSoft server)
By setting this field to conf or Conference, you specify conf@<proxy_server _address>: <proxy_port>.
– To reach the media server using a different address/port than that specified by the proxy, set this field to the following:
conf@<media_server _address>: <media_port>
3. Click Save Settings to save your changes.
Mitel Web UI