Installation guide

Operational Features

5-211 41-001561-00 REV00 – 10.2014

and you dial out the number 5551212, the phone executes a GET on:

http://10.50.10.140/outgoing.pl?number=5551212

You can configure this feature via the configuration files or the Mitel Web UI.

Configuring XML Action URIs

Use the following procedures to configure XML Action URIs using the configuration files or the Mitel Web UI.

Notes:

• If the phone cannot find the Action URI you specify, it returns a “NULL” response. For example,

http://10.50.10.140/outgoing.pl?number=

• After executing a GET on the URI, the phone expects a valid XML response. If a valid XML response is not received, an

error message is displayed on screen.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Action URI Settings” on pageA-131.

Mitel Web UI

1. Click on Advanced Settings->Action URI.

2. Enter an XML URI for a startup event in the “Startup” field. For example:

http://10.50.10.140/startup

This parameter specifies the URI for which the phone executes a GET on when a startup event occurs.