Installation guide

Operational Features
5-207 41-001561-00 REV00 – 10.2014
Using the XML Customized Service
After you create, save, and configure the IP phone with an XML application, the customized service is ready for you to
use.
Reference
For more information about customizing the phones using XML objects, contact Mitel Customer Support regarding the “
XML Development Guide.”
Use the following procedure to use the XML feature on the IP phone.
Action URIs
The IP phones have a feature that allows an administrator to specify a uniform resource identifier (URI) that triggers a GET
when certain XML events occur. The Action URI feature prevents the phones from hanging if the Action URIs should fail.
The phones also support transparent, non-blocking, XML post execute item URIs.
The IP phone XML events that support this feature are defined in the following table.
9. In the "XML Push Server List (Approved IP Addresses)" field, enter the host IP address and/or DNS server. You can enter multiple IP address
and/or DNS servers (separated by commas). In the example in Step 6, the illustration shows a host IP address of "10.50.10.53, 10.50.10.54" in
the applicable field.
10. Click Save Settings to save your changes.
Note:
No posting is performed if a session times out.
IP Phone UI
For the 6863i/6865i::
1. Press the programmable key configured on the phone for XML services.
A "Custom Features" screen displays.
2.
Use the
5 and 2 to scroll through the customized features.
3. Select a service to display the information for that customized service.
Message services display to the screen after pressing the programmable key.
For user input services, follow the prompts as appropriate.
4. To exit from the "Custom Features" screen, press the XML programmable key again.
For the 6867i/6869i:
1. Press the XML softkey on the phone. An XML screen displays.
2. Use the 5 and 2 to scroll through the customized features.
3. For menu and directory services, select a service to display the information for that customized service. Message services display to the
screen after pressing the respective key. For user input services, follow the on-screen prompts.
4.
To exit from the XML screen, press the XML softkey again or press the button.
Action URI Description
Startup Specifies the URI for which the phone executes a GET on when a startup event occurs.
Successful Registration Specifies the URI for which the phone executes a GET on when a successful registration event
occurs.
Mitel Web UI