Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-206
10. In the "XML Push Server List (Approved IP Addresses)" field, enter the host IP address and/or DNS server. You can enter multiple IP address
and/or DNS servers (separated by commas). In the example in Step 8, the illustration shows a host IP address of "10.50.10.53, 10.50.10.54" in
the applicable field.
11. Click Save Settings to save your changes.
Note:
No posting is performed if a session times out.
Mitel Web UI
For the 6863i/6865i::
1. Click on Operation->Programmable Keys.
2. Select an available key.
3. In the "Type" field, select XML from the list box.
4. In the "Value" field, enter the IP address or qualified domain name of the XML application.
5. In the "XML Application URI" field, enter the HTTP server path or qualified domain name of the XML application you want to load to the IP
phone. For example, you could enter an XML application called "http://172.16.96.63/aastra/internet.php" in the applicable field.
6. In the "XML Application Title" field, enter the name of the XML application that you want to display on the IP phone Services Menu. In the
illustration above, the XML Application Title is "Aastra Telecom".
7. Click Save Settings to save your changes.
The XML application is applied to the IP phone immediately.
When the XML application is pushed to the phone via an HTTP POST, a host IP address or DNS server is required.
8. Click on Advanced Settings->Configuration Server.
Mitel Web UI