Installation guide

Operational Features
5-199 41-001561-00 REV00 – 10.2014
The parameter is set to 0 (no visual indicators) by default.
Configuring SCA Voicemail Visual Indicators
Use the following procedure to configure the SCA voicemail visual indicators.
Notes:
• The above behaviors are also applicable to expansion module softkeys representing SCA lines.
• For programmable keys representing SCA lines, the respective programmable key’s LED will flash when voicemail mes-
sages are pending.
• The “voice mail indicator” parameter takes precedence over the “line icon disabled” parameter. If both “voice mail
indicator” and “line icon disabled” are enabled, an envelope icon (and number of messages, if configured) will be dis-
played when voicemail messages are pending.
• For information on SCA see “Shared Call Appearance (SCA) Call Bridging”on page 5-154.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “SCA Voicemail Indicator Settings” on pageA-104.