Installation guide

Operational Features
5-197 41-001561-00 REV00 – 10.2014
Local Directory Loose Number Matching
If the incoming calling number does not match exactly to the local directory, the lookup will fail and the phone will not
display the stored directory name. Now, the phone can be configured to match only the specified number of digits
against the local directory.
Administrators can enter a parameter “directory digits match” to determine the number of digits (from the incoming
call) that the phone will use to perform a lookup in the local directory to match the number to a contact. The phone will
take the last n digits of the incoming call to perform the lookup.
For example, if a local directory contains the following contact:
555123456 Spain Office
and the “directory digits match” parameter is configured (directory digits match: 9), the phone will take the last 9 digits
of the incoming number ([phone]
) and match it to the contact in the directory and display the following on the
phone:
Spain Office
[phone]
Configuring Local Directory Loose Number Matching
Use the following procedures to configure local directory loose number matching on the IP phones.
Customizable Directory List Key
The IP phones may have a Directory List key (either a hard key or softkey/programmable key) depending on the model of
the phone. An Administrator can specify a URI override for the Directory List key by defining the “directory script”
parameter in the configuration files. Specifying a URI for this parameter causes the creation of an XML custom applica-
tion instead of the standard function of the Directory List key. An Administrator can configure this parameter using the
configuration files only.
Creating a Customizable Directory List Key
Use the following procedure to create a customized Directory List key on the IP Phone using the configuration files.
Voicemail
The Voicemail feature on the IP phones allow you to configure lines with phone numbers so the phone can dial out to
connect to a voicemail server. You associate the Voicemail numbers with the phone numbers configured on each line.
For each assigned Voicemail number, there can be a minimum of 0 or a maximum of 1 Voicemail access phone number.
The Voicemail list displays a list of phone numbers assigned to the IP phone that has registered voicemail accounts asso-
ciated with them.
Configuration Files
For specific parameters you can set in the configuration files for configuring the local directory loose number matching, see Appendix A, the section,
“Local Directory Loose Number Matching” on pageA-124.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Customizable Directory List Key” on pageA-124.
Note:
The Voicemail list does not display the voicemail access number.