Installation guide

Operational Features
5-195 41-001561-00 REV00 – 10.2014
Enabling/Disabling Directories and Renaming Labels Using the Phone UI
Use the following procedure on the phone’s UI to enable/disable directories and rename directory folder labels.
Entering Usernames/Passwords and Connection Testing
Before a specfic Directory can be loaded, user credentials (i.e. username and password) for each respective external
Directory source will need to be entered using the phone’s UI by navigating to the Options > Credentials menu. For the
6867i and 6869i, this menu also allows users to test their connection to the external Directory source.
IP Phone UI
For the 6863i/6865i:
1.
Press the key on the phone to enter the Option List.
2. Select Directory.
3. Select External Sources.
4. Navigate to the Directory Source you wish to enable/disable (e.g. LDAP) and press the 4 Enter key.
Note:
CSV 1 and 2 are enabled by default. All other Directory sources are disabled by default.
5. Navigate to the State setting and press the 4 Enter key.
6. Select a state (ON or OFF).
7.
Press the key or select 4Set .
Your selection will be immediately applied to the phone.
8. Navigate to the Label setting and press the 4 Enter key.
9. Using the dialpad keys, enter in a name for the respective directory folder.
10. Select 4Set .
Your selection will be immediately applied to the phone.
For the 6867i/6869i:
1.
Press on the phone to enter the Options List.
2.
Navigate to the Directory > External Sources option and press the button or Select softkey.
3.
Use the 2 and 5 keys to navigate through the list of Directory sources and press the button to enable or disable each one as per your
preference.
Note:
CSV 1 and 2 are enabled by default. All other Directory sources are disabled by default.
4. Press the 5 key to navigate to the Enable/Disable tab, and press the 4 key to switch to the Labels tab.
5. Use the 2 and 5 keys to navigate through the list of Directory source labels and using the dialpad keys (or K680i Keyboard if available) enter
in a name for the respective directory folders.
6. Press the Save softkey to save your changes.
7.
Press on the phone to enter the Options List.
8.
Navigate to the Directory > External Sources option and press the button or Select softkey.
Note:
Administrators may define a username and password in the “ ldap server ” configuration parameter. In such cases, a
username and password does not have to be entered by the user. The fields under the LDAP tab will indicate that it
already contains Administrator-defined credentials. If a username and password are entered by the user, the user-
entered credentials take precendence over those defined by the Administrator.