Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-178
Configuring Call Forward via the IP Phone UI (6867i/6869i)
Once Call Forward is enabled on your phone, you can access the Call Forward menus by pressing a pre-configured Call
Forward key, or by selecting Options > Call Forward from the IP phone UI.
CFWD in Account Mode
10.
For the CFWD No Answer state, in the CFWD Number screen, press the
2 navigation key to scroll to the CFWD No. Rings screen and press
4Change.
11.
Press the
2Next key to select the number of rings to apply to the phone for call forwarding incoming calls. Valid values are 1 to 20. Default
is 3.
When the phone receives an incoming call, and call forward is configured on the phone, the phone rings the number of times you specify
in the No. Rings screen, and then forwards the call.
12.
Press
4Set to save the change.
13.
Press
3Done to save all your changes.
Each time you press
3 Done, the following screen displays.
14. Press # Confirm to confirm the change(s) each time the Apply Changes screen displays.
All changes are saved to the phone for all accounts.
IP Phone UI
1.
From the Home screen press the
4 navigation key to move to the Line Selection screen.
2.
Highlight the desired account using the
2 and 5 navigation keys.
IP Phone UI
CFWD No. Rings Screen
Cfwd NoAnswer
Use to view
Cfwd State
On
Done Change
1
Cfwd Number
Done Change
2
No. Rings
3
Next Set
Change
No. Rings
3
Done Change
3

Apply Changes
0Cancel
#Confirm