Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-164
Configuring Last Call Return
Use the following procedures to configure LCR on the IP phones.
Configuration Files
For specific last call return (lcr) parameters you can set in the configuration files, see Appendix A, the section, “Softkey/Programmable Key/Keypad
Key/Expansion Module Key/Hard Key Parameters” on pageA-174.
Mitel Web UI
For the 6863i/6865i:
1. Click on Operation->Programmable Keys.
2. Pick a key to configure for Last Call Return.
3. In the "Type" field, select Last Call Return.
4. In the "Line" field, select a line for which to apply the lcr configuration.
5. Click Save Settings to save your changes.