Installation guide
Operational Features
41-001561-00 REV00 – 10.2014 5-158
Configuring Park/Pickup Static Configuration Using the Configuration Files
Use the following parameters to configure park/pickup static configuration:
• sprecode
• pickupsprecode
Configuring Park/Pickup Static Configuration Using the Mitel Web UI
Park/Pickup Programmable Configuration (Using a Softkey)
The programmable method of configuration creates park and pickup keys (softkeys, programmable keys, expansion mod-
ule keys) that you can configure on the IP phones.
For the 6867i and 6869i IP phones you can set a key as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify the state of the park and/or pickup keys
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,“” on pageA-199.
Mitel Web UI
1. Click on Basic Settings ->Preferences ->General
2. Enter a server value in the Park Call field to which incoming live calls will be parked.
Note:
For values to enter in this field, see the table “Park/Pickup Call Server Configuration Values” on page5-157.
3. Enter a server value in the Pick Up Parked Call field.
4. Click Save Settings to save your changes.