Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-130
Applicable values for the above parameters include:
• 100 (Ring tone 1)
• 101 (Ring tone 2)
• 102 (Ring tone 3)
• 103 (Ring tone 4)
• 104 (Ring tone 5)
• 105 (Ring tone 6)
• 106 (Ring tone 7)
• 107 (Ring tone 8)
• 108 (Ring tone 9)
• 109 (Ring tone 10)
• 110 (Ring tone 11)
• 111 (Ring tone 12)
• 112 (Ring tone 13)
• 113 (Ring tone 14)
• 114 (Ring tone 15)
• 115 (Silence)
Examples
To enable ring tone 3 playback for a BLF/List-monitored extension configured on a soft/prg/topsoft/expmodX “key1”, add
the following parameters in the respective configuration file:
For Softkeys
play a ring splash: 1
softkey1 type: list
softkey1 ring splash: 102
For Programmable Keys
play a ring splash: 1
prgkey1 type: list
prgkey1 ring splash: 102
For Top Softkeys
play a ring splash: 1
topsoftkey1 type: list
topsoftkey1 ring splash: 102
For Expansion Module Keys
play a ring splash: 1
expmod1 key1 type: list
expmod1 key1 ring splash: 102
Note:
Ring tones are based on the current ring tone set configured on the IP phone.