Installation guide

Operational Features
5-109 41-001561-00 REV00 – 10.2014
Reference
For more information about key functions for your model phone, see your <Model-Specific> IP Phone User Guide.
Configuring Softkeys and Programmable Keys
Use the following procedures to configure the softkeys and programmable keys on the IP phone.
Conference conf Conference Indicates the key is configured as a Conference key (for local conferenc-
ing).
(For Sylantro and BroadSoft Servers) An Administrator can also enable
centralized conferencing on the IP Phones.
For more information about using the Conference key, see your <Model-
Specific> IP Phone User Guide.
For information about enabling centralizing conferencing, see “Central-
ized Conferencing (for Sylantro and BroadSoft Servers)” on page5-227.
Transfer xfer Transfer Indicates the key is configured as a Transfer key for transferring calls.
For more information about using the Transfer key, see your <Model-Spe-
cific> IP Phone User Guide.
Icom icom Intercom Indicates the key is set to be used as the Intercom key. For more informa-
tion about using the Intercom key, see your <Model-Specific> IP Phone
User Guide.
For information about other Intercom features, see “Incoming/Outgoing
Intercom with Auto-Answer and Barge In” on page5-77.
Services services Services Indicates the key is set to access Services, such as, Directory List, Callers
List, Voicemail, and any other XML applications configured on the phone.
For more information about using the Services key, see your <Model-Spe-
cific> IP Phone User Guide.
Phone Lock phone lock Phone Lock Indicates the key is configured as a phone lock key, allowing you to press
this key to lock/unlock the phone.
For more information about the lock/unlock key, see “Locking IP Phone
Keys” on page5-47.
Paging paging Paging Indicates the softkey is set for Group Paging on the phone. Pressing this
key automatically sends a Real Time Transport Protocol (RTP) stream to
pre-configured multicast addresses without involving SIP signaling.
For more information about the Paging key, see “Group Paging RTP Set-
tings” on page5-80.
Empty
(Not applicable to pro-
grammable keys or
expansion module keys)
empty Empty Indicates the key is configured to force a blank entry on the IP phone dis-
play for a specific key. If a particular key is not defined, it is ignored.
For more information about empty keys, see your <Model-Specific> IP
Phone User Guide.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections, “Softkey/Programmable Key/Keypad Key/Expansion Mod-
ule Key/Hard Key Parameters” on pageA-174.
Softkey/Programma-
ble Key Function
Configuration File
Parameter
Mitel Web UI Param-
eter
Description