Installation guide
Operational Features
5-49 41-001561-00 REV00 – 10.2014
The Delete key allows you to remove entries from the Local Directory List and Callers List. (Must enter the Directory or
Callers list and select an entry, then press twice to delete entry).
By default, the Save and Delete keys are locked so that a user can use them for saving and deleting only. An Administra-
tor can unlock these keys using the configuration files, allowing the keys to be programmed with other functions if
required. An Administrator can use the following parameters in the configuration file to lock and unlock the Save and
Delete keys for the 6865i:
• prgkey5 locked
• prgkey6 locked
The value of "0" unlocks the keys, and the value of "1" locks the keys. The default is "1" (lock).
The following is an example of unlocking the Save and Delete keys on the 6865i using the configuration files:
Example:
prgkey5 locked: 0
prgkey6 locked: 0
Once the Save and Delete keys are unlocked, a User can change the function of the keys using the Mitel Web UI. An
Administrator can change the function of the keys using the Mitel Web UI or the configuration files.
Locking and Unlocking the Save and Delete Keys Using the Configuration Files
Notes:
• If you change the functions of the Save and Delete keys, and then an Administrator locks the respective keys, the
functions are automatically set back to the default settings of "Save" and "Delete"
• The Save and Delete functions are limited to Keys 5 and 6 on the 6865i IP phones.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
“Locking the SAVE and DELETE Keys”
on
pageA-204
.