Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-48
You can lock and unlock keys using the configuration files only. When viewing the locked key via the Mitel Web UI, the key
is grayed out (disabled) and cannot be changed. Locking is dynamic for XML pushes.
You use the following “locking” parameters in the configuration files to lock the softkeys and/or programmable keys on all
the phones. If no key settings are configured locally, the locking parameters impact existing softkey and programmable
key parameters defined in the configuration files as detailed in the table below.
Locking the IP Phone Keys using the Configuration Files
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
Locking/Unlocking the SAVE and DELETE keys
By default, the 6865i has two keys dedicated to the Save and Delete functions. These two keys can be made programma-
ble by the Administrator, freeing up the total number of programmable keys if required.
If a System Administrator unlocks the Save and Delete keys, these keys can be configured with the same functions that
are available for the other programmable keys. Only the System Administrator can unlock these keys.
The Save key allows you to save entries to the Local Directory and perform a Save-To from the Callers List. It also allows
you to save speeddial information to a programmable key. You can also use the Save key while using specific XML applica-
tions.
Locking Parameter Impacted Parameters Applicable Phone Models
softkeyN locked softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
6867i
6869i
topsoftkeyN locked topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
6867i
6869i
prgkeyN locked prgkeyN type
prgkeyN value
prgkeyN line
6863i
6865i
pnhkeypadN locked pnhkeypadN value
pnhkeypadN line
All IP phone models
expmodX keyN locked expmodX keyN type
expmodX keyN label (M685i only)
expmodX keyN value
expmodX keyN line
6865i
6867i
6869i
hardkeyN locked hardkeyN type
hardkeyN value
hardkeyN line
6867i
6869i
Note:
The 6863i and 6865i IP phones prevent users from setting a Speeddial key via the Phone UI on a key that has been
locked.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,“Locking Keys” on pageA-202.
Note:
Applicable to the 6865i IP Phone only.