Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-38
You use the following fields in the Mitel Web UI to specify which language packs to load:
Once the language pack is loaded to the phone, it is available for selection from either the configuration files, the IP Phone
UI or the Mitel Web UI.
Specifying the Screen Language to Use
Once the language pack(s) have loaded, you must then specify which language to use on the phone. After the phone has
booted up, you can specify which language(s) to use. You can use the configuration files (via the “language” parameter)
and the IP Phone UI to specify the language for the IP Phone UI. You can use the configuration files (via the “web lan-
guage” parameter) and Mitel Web UI to specify the files for the Mitel Web UI.
Use the following procedures to specify the language to use on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Language Settings” on pageA-151 and “Language Pack Set-
tings” on pageA-153.
Notes:
• If you specify the language to use on the phone via the configuration files, you must reboot the phone for the
changes to take affect.
• All languages may not be available for selection. The available languages are dependant on the language packs cur-
rently loaded to the IP phone.
IP Phone UI
For the 6863i/6865i:
1.
Press on the phone to enter the Options List.
2. Select Language.
3. Select Screen Language.
4. Select the applicable language.
Note:
All languages may not be available for selection. The available languages are dependant on the language packs currently loaded to the IP
phone. English is the default language and cannot be changed or removed. For more information about loading language packs, see “Load-
ing Language Packs” on page5-37.
5. Press Done to save the changes.
The change is dynamic. The IP phone UI displays all menu items in the language you chose.
For the 6867i/6869i:
1.
Press to enter the Options List.
2.
Navigate to the Language option and press the button or Select softkey.
3.
With Screen Language highlighted press the
4 key to move to selection column.