Installation guide
Operational Features
5-31 41-001561-00 REV00 – 10.2014
Picture ID Feature
The Picture ID feature on the 6867i and 6869i shows a picture ID of a caller on the LCD for all of the following events on
the phone:
• Incoming Calls (matched to Caller ID numbers)
• Outgoing Calls (matched to dialed numbers)
• Directory entries
• Callers List entries
• Redial List entries
Your Administrator stores the pictures in a centralized picture repository. The pictures are dynamically retrieved from the
centralized server for each call and then locally cached in the phone to reduce network traffic.
If there is no picture on the central server for the dialed number and/or Caller Id number, and Directory, Callers List,
and/or Redial List entry, the generic blue figure image is shown.
Pictures must be in “.png” format, 150pixels wide x 200pixels tall, and in 24-bit or 32-bit color. The filenames for pictures
must be stored using the phone number as the filename (for example, 9995551234.png). Enabling and disabling Picture
ID on the phone can be done by an Administrator using the configuration files only
Enabling/Disabling the Picture ID on the Phone Using the Configuration Files
Use the following parameter to enable/disable Picture ID on the phone.
Audio DHSG Headset
DHSG is a standard for telecommunication headsets. The 6865i, , 6867i, and 6869i IP Phones support the use of a DHSG
headset.
Mitel’s DHSG headset support has been tested and verified with the following products:
• GN Netcom GN 9350, GN 9350e, GN 9120, GN 9125.
All require the GN 14201-10 cable.
• Plantronics CS60, CS70N, CS351N, and Voyager 510S.
Note:
Applicable to the 6867i and 6869i IP Phones only.
Note:
The Picture ID feature supports the use of TFTP, FTP, HTTP, and HTTPS protocols when downloading pictures.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Picture ID Feature” on pageA-55.
Note:
Applicable to the 6865i, , 6867i, and 6869i IP Phones only.
Generic
Blue Image