Installation guide
Operational Features
41-001561-00 REV00 – 10.2014 5-28
Configurable Home/Idle Screen Modes
The 6867i and 6869i IP phones contain two Home/Idle screen layout options. The default primary screen mode provides
users with a larger date and time and displays the Screen Name (“sip screen name”) parameter beside the line number in
the top status bar.
The secondary screen mode displays both the Screen Name and Screen Name 2 parameters. They are displayed above the
smaller, repositioned date and time.
Administrators can switch the home/idle screen to the preferred layout by defining the “idle screen mode” parameter in
the configuration files or by navigating to the Display options menu on the phone.
Switching the 6867i/6869i IP Phone’s Home/Idle Screen Mode Using the Configuration Files
Use the following parameter to switch the 6867i/6869i IP phones home/idle screen mode.
Note:
Applicable to the 6867i and 6869i IP Phones only.
Note:
Screen Name 2 (“sip screen name 2”) is not displayed on the 6867i/6869i IP phone’s screen when the primary screen
mode is configured for use.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Home/Idle Screen Settings” on pageA-54..
6867i Primary Home/Idle Screen Mode
6867i Secondary Home/Idle Screen Mode
6869i Primary Home/Idle Screen Mode
6869i Secondary Home/Idle Screen Mode