Installation guide

Operational Features
41-001561-00 REV00 – 10.2014 5-26
Display
The Display option on the 6867i and 6869i IP phones allows you to set the following on your phone:
Brightness Level
Brightness Timer
Brightness Level
The "Brightness Level" option allows you to set the amount of light that illuminates the LCD display. Use this option to set
your preference of brightness.
Setting Brightness
7. If you select “Auto, press the Advanced softkey to set the automatic timer.
8. Using the keypad, enter the amount of seconds you want the phone to stay backlit when the phone is idle. Valid values are 1 to 7200 sec-
onds. Default is 600 seconds (equals 10 minutes). When this period of time is reached, the phone turns OFF the backlight. Use the "Back-
space" and/or "Clear" softkeys to delete entries if required.
9. Press Done to save your setting. The setting applies immediately to the phone.
Note:
Applicable to the 6867i and 6869i IP Phones only.
IP Phone UI
1.
Press to enter the Options List.
2.
Navigate to the Display option and press the button or Select softkey.
3.
Press the
2 key to navigate to the Brightness Level setting.
4.
Use the
3 and 4 navigation buttons to increase or decrease the intensity of brightness on the LCD.
5. Press the Save softkey to save your changes.
IP Phone UI