Installation guide

Operational Features

41-001561-00 REV00 – 10.2014 5-24

Setting Time Server Using the Configuration Files

Use the following procedure to enable/disable the Time Server and optionally set the IP Address of Time Servers 1, 2,

and/or 3.

Setting Time Server Using the IP Phone UI

Use the following procedure to set the Time Server and optionally set the IP Address of Time Servers 1, 2, and/or 3.

Setting Time Server Using the Mitel Web UI

Use the following procedure to set the Time Server and optionally set the IP Address of Time Servers 1, 2, and/or 3.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Time Server Settings” on pageA-44.

IP Phone UI

For the 6863i/6865i:

Press on the phone to enter the Options List.

2. Select Preferences->Time and Date.

3. Select Timer Server 1, Time Server 2, and/or Time Server 3.

4. Enter the IP address of the Time Server, in dotted decimal format. Use the available softkeys to help you enter the information.

5. Click Done to save your changes.

For the 6867i/6869i:

Press to enter the Options List.

2. Select Time and Date -> Set Date and Time.

Ensure there is a checkmark in the box corresponding to the Use Network Time setting. If there is no checkmark, press the button to

enable the Use Network Time setting.

Press the

2 key to highlight Time Server 1, Time Server 2, or Time Server 3.

5. Using the keys on the dialpad, enter an IP address or domain name for the time server.

6. Press the Save softkey to save your changes.

Mitel Web UI

1. Click on Basic Settings->Preferences->Time and Date Setting.

To enable/disable Time Server:

2. The “NTP Time Server” field is enabled by default. If you need to disable the Time Server, uncheck the box. The Time Server 1, 2, and 3 fields

are grayed out when disabled.

To set Time Server 1, 2, and/or 3: