Installation guide
Operational Features
5-9 41-001561-00 REV00 – 10.2014
Locking/Unlocking the Phone Using the Mitel Web UI
Use the following Mitel Web UI procedure to lock/unlock an IP phone and prevent it from being used or configured.
Configuring a Lock/Unlock Key Using the Configuration Files
Using the configuration files, you can configure a key on the phone (softkey, programmable key, or expansion module
key) to use as a lock/unlock key. In the configuration files, you assign the function of the key as “phonelock”.
Use the following procedure to configure a key as a lock/unlock key using the configuration files.
Reference
To use the lock/unlock softkey or programmable key, see “Using the Configured Lock/Unlock Softkey on the IP Phone”
on page5-10.
Configuring a Lock/Unlock Softkey using the Mitel Web UI
Using the Mitel Web UI, you can configure a softkey on the phone (softkey, programmable key, expansion module key)
to use as a lock/unlock key. In the Mitel Web UI, you assign the function of the softkey as “Phone Lock”.
Mitel Web UI
1. Click on Operation->Phone Lock.
Lock the phone:
2. In the “Lock the Phone?” field, click Lock.
The phone locks dynamically and displays the following message:
“Phone is locked”.
Unlock the phone:
3. Click on Operation->Phone Lock.
4. In the “Unlock the Phone?” field, click Unlock.
The phone unlocks dynamically and displays the following message: “Phone is unlocked”.
Configuration Files
To configure a softkey/programmable key as a lock/unlock key using the configuration files, see Appendix A, the section, “Softkey/Programmable
Key/Keypad Key/Expansion Module Key/Hard Key Parameters” on pageA-174.