Installation guide

Configuration Server Protocol
4-82 41-001561-00 REV00 – 10.2014
For the 6867i/6869i:
Note:
For more information on configuring the HTTPS security method, HTTP to HTTPS redirect, and HTTPS server blocking for HTTP XML
POSTs, see the section, “HTTPS Client/Server Configuration” on page4-30.
9. Press Done or Set repeatedly until the session prompts you to restart the IP phone to apply the configuration settings.
10. Select Restart.
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is “22222”.
4. Select Configuration Server.
IP Phone UI
HTTP Settings
• Select HTTP Server
• Enter the IP address of the HTTP server.
• Press Done or Set.
• Select HTTP Path.
• Enter the path name for which the configuration files reside on the HTTP server for downloading to the IP
Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6863i\configfiles.
• Select HTTP Port.
• Enter the HTTP port that the server uses to load the configuration to the phone over HTTP. Default is 80.
• Press Done or Set.
HTTPS Settings
• Select HTTP Client.
• Select Download Server.
• Enter the IP address of the HTTPS server.
• Press Done or Set.
• Select Download Path.
• Enter the path name for which the configuration files reside on the HTTPS server for downloading to the IP
Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6863i\configfiles.
• Press Done or Set.
• Select Client Method.
• Select the client method to use for downloading the configuration files (SSl 3.0 or TLS 1.0). For more informa-
tion about which client method to use, see the section, “HTTPS Client/Server Configuration” on page4-30.
• Select Download Port.
• Enter the HTTPS port that the server uses to load the configuration to the phone over HTTPS. Default is 443.
• Select HTTPS Server.
• Select HTTP->HTTPS.
• Press Change to select “Do not redirect” or “Redirect”. D ef au lt is “Do not redirect”. Enabling this feature redi-
rects the HTTP protocol to HTTPS.
• Press Set.
• Select XML HTTP POSTs.
• Press Change to select “Do not block” or “Block”. E n a bl i ng t h i s fe a t u r e b l o c k s XML HTTP POSTs from the IP
Phone.