Installation guide

Global SIP Settings
41-001561-00 REV00 – 10.2014 4-59
Configuring Basic SIP Network Settings (optional)
You can configure SIP network settings using the configuration files, the IP Phone UI, or the Mitel Web UI.
Configure Global Call Waiting
10. The "Call Waiting" field is enabled by default. To disable call waiting on a global basis, uncheck this box.
For more information about setting the call waiting parameters, see Chapter 5, the section, “Call Waiting” on page5-55.
Configure Per-Line Call Waiting
11. The "Call Waiting" field is set to “Global” by default. To enable call waiting for a specific line, select “enabled” from the list in this field. To dis-
able call waiting for a specific line, select “disabled” from the list in this field.
For more information about setting the call waiting parameters, see Chapter 5, the section, “Call Waiting” on page5-55.
12. Click Save Settings to save your changes.
Note:
To configure the SIP settings per-line, use the configuration files or the Mitel Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “SIP Basic, Global Settings” on pageA-59 or “SIP Basic, Per-
Line Settings” on pageA-67.
Note:
You can set global configuration only using the IP Phone UI.
Mitel Web UI