Installation guide

Network Settings
41-001561-00 REV00 – 10.2014 4-45
Mitel Web UI
1. Click on Advanced Settings->Network->VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
2. Enable VLAN by checking the VLAN Enable field check box. (Disable this field by unchecking the check box).
3. With VLAN enabled, select the priority (0 to 7) for non-IP packets in the Priority, Non-IP Packet field.
4. Enable or disable VLAN HPQ by checking or unchecking the HPQ Enable field check box.
To set VLAN ID and priority for the LAN Port (Port 0):
5. Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 1.
Note:
Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from 1 to 4094 will allow frames from the PC port (containing a VLAN
ID) to be untagged before being forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the con-
figured VLAN ID before being forwarded to the PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095 and the PC Port VLAN ID to any ID from 1 to 4094. The
following example sets the PC port to be on VLAN 3 but the LAN port is configured as untagged.