Installation guide

Network Settings
4-42 41-001561-00 REV00 – 10.2014
For the 6863i/6865i:
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Network Settings.
4. Select Ethernet and VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
5. Select VLAN Settings.
6. Select VLAN.
7. Select Enable.
8. Press Done or Set to save the changes.
9. Select LAN Port VLAN.
10. Select Other Priority and enter a non-IP priority value from 0 to 7 for non-IP packets.
Default for this field is 5.
11. Press Done (2 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for LAN Port (Port 0):
12. Select LAN Port VLAN.
13. Select LAN Port VLAN ID and enter a value from 1 to 4095 to specify the VLAN ID for the LAN Port.
Default is 1.
Note:
Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from 1 to 4094 will allow frames from the PC port (containing a VLAN
ID) to be untagged before being forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the con-
figured VLAN ID before being forwarded to the PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095 and the PC Port VLAN ID to any ID from 1 to 4094. The
following example sets the PC port to be on VLAN 3 but the LAN port is configured as untagged.
VLAN Settings->VLAN: Enable
VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 4095
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 3
14. Press Enter or Set to save the change.
15. Select VLAN Priority.
16. Select one of the following VLAN Protocols:
• SIP Priority
• RTP Priority
• RTCP Priority
17. Enter a VLAN priority value from 0 to 7 for the associated Protocol. Default values for each Protocol are:
SIP Priority = 3
RTP Priority = 5
RTCP Priority = 5
18. Press Done (2 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for PC Port (Port 1):
19. Select PC Port VLAN.