Installation guide

Network Settings
4-36 41-001561-00 REV00 – 10.2014
Virtual LAN (optional)
Virtual Local Area Network (VLAN) is a feature on the IP phone that allows for multiple logical Ethernet interfaces to send
outgoing RTP packets over a single physical Ethernet as described in IEEE Std 802.3. On the IP phone, you configure a
VLAN ID that associates with the physical Ethernet port.
Mitel Web UI
1. Click on Advanced Settings->Network->HTTPS Settings.
2. The “Validate Certificates” field is enabled by default. To disable validation of certificates, click the check mark in the box to clear the
check mark.
When this parameter is enabled, the HTTPS client performs validation on SSL certificates before accepting them.
Notes:
• This parameter is immediately applied after clicking the SAVE SETTINGS button.
• If you are using HTTPS as a configuration method, and use a self signed certificate, you must disable (uncheck) this field before
upgrading to Release 2.3 of the IP Phones.
3. The “Check Certificate Expiration” field is enabled by default. To disable validation of certificate expiration, click the check mark in the box
to clear the check mark.
When this parameter is enabled, the HTTPS client verifies whether or not a certificate has expired prior to accepting the certificate.
Notes:
• This parameter is immediately applied after clicking the SAVE SETTINGS button.
• If the “Check Certificates Expiration” parameter is set to Ye s , the clock on the phone must be set for the phone to accept the certificates.
4. The “Check Certificate Hostnames” field is enabled by default. To disable validation of hostnames, click the check mark in the box to clear
the check mark.
Note:
This parameter is immediately applied after clicking the SAVE SETTINGS button.
5. If you require the download of User-provided certificates in a .PEM formatted file, enter the file name in the format <filename.pem> in the
“Trusted Certificates Filename” field. For example:
trustedCerts.pem
This parameter specifies a file name for a .PEM file located on the configuration server. This file contains the User-provided certificates in
PEM format. These certificates are used to validate peer certificates.
Notes:
• You must disable the “Validate Certificates” field in order for the phone to accept the User-provided certificates.
• This parameter requires you restart the phone in order for it to take affect.
6. Click Save Settings to save your changes.
7. If you entered a filename in the “Trusted Certificates Filename” field, click on Operation->Reset, and restart the phone for the changes
to take affect.
HTTPS Validation
Certificate
Parameters