Installation guide

Network Settings
4-32 41-001561-00 REV00 – 10.2014
For the 6867i/6869i:
HTTPS Local Certificate Support
The 6800i series IP phones provide a built-in common 2048-bit HTTPs certificate allowing for mutual authentication
between the HTTPs server and the phones during an HTTPs session. The certificate can be used for file download proc-
esses (e.g. configuration file download for secure provisioning) and for HTTPs/XML requests. Please go to www.mitel-
docs.com to obtain the client certificate.
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is “22222”.
4. Select Configuration Server.
5. In the Download Protocol field, select HTTPS.
Configure HTTPS Client
6. In the HTTPS Client Method field, press a client method value to use for HTTPS. Valid values are:
• SSL 3.0 (default)
• TLS 1.0
Configure HTTPS Server
7. In the HTTPS Server field, enter the IP address of the HTTPS server in the text box. Enabling this feature redirects the HTTP protocol to
HTTPS.
8. Press the Save softkey.
9. Restart the phone for the selection to take affect.
Mitel Web UI
1. Click on Advanced Settings->Network->HTTPS Settings.
2. Select an HTTPS client method to use from the HTTPS Client Method field. Valid values are:
• SSL 3.0 (default)
• TSL 1.0
3. Enable HTTP to HTTPS redirect by checking the HTTPS Server - Redirect HTTP to HTTPS field check box. (Disable this field by unchecking
the check box). Default is disabled.
4. Enable the blocking of XML HTTP POSTs by the HTTPS server by checking the HTTPS Server - Block XML HTTP POSTs field check box. (Dis-
able this field by unchecking the check box). Default is disabled.
5. Click Save Settings to save your settings.