Installation guide

Network Settings
41-001561-00 REV00 – 10.2014 4-19
Configuring LAN and PC Port Negotiation
Ethernet is the computer networking technology for local area networks (LANs). You use the LAN Port to connect to a LAN
using a twisted pair 10BASE-T cable to transmit 10BASE-T Ethernet. You use the PC Port to connect to the configuration
server (your PC).
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is “22222”.
4. Select Network > Settings.
5. In the IP Address field, enter the IP address of your phone. The IP Address must be entered in the format 0.0.0.0; for example, 192.168.0.7.
6. In the Subnet Mask field, enter the subnet mask address. For example, 255.255.0.0.
7. In the Gateway field, enter the IP address of your gateway. The Gateway must be entered in the format 0.0.0.0; for example, 192.168.0.1.
8. If required, enter the Primary DNS and/or Secondary DNS in the respective fields. The IP addresses must be entered in the format 0.0.0.0.
9. Press the Save softkey.
The IP Phone is manually configured.
Mitel Web UI
1. Click on Advanced Settings->Network->Basic Network Settings.
2. Enter an IP address of the phone in the IP Address field.
3. Enter a subnet mask in the Subnet Mask field.
4. Enter a gateway address in the Gateway field.
5. Enter a Primary DNS in the Primary DNS field, and/or a secondary DNS in the Secondary DNS field.
6. Click Save Settings to save your settings.
The IP phone is manually configured.
IP Phone UI