Installation guide

Administrator Level Options
3-46 41-001561-00 REV00 – 10.2014
Firmware Update Features
The IP phones support the protocols, TFTP, FTP, HTTP or HTTPS to download configuration files and upgrade firmware to
the phones from a configuration server.
You can download the firmware stored on the configuration server in one of three ways:
• Using the “Firmware Update” page in the Mitel Web UI at the location Advanced Settings->Firmware Update.
• Using the IP Phone UI or the Mitel Web UI to restart the phone. The phone automatically looks for firmware updates
and configuration files during the boot process.
• Setting an Auto-Resync feature to automatically update the firmware, configuration files, or both at a specific time in
a 24-hour period). (Feature can be enabled using the configuration files or the Mitel Web UI).
Reference
For more information about firmware update, see Chapter 8, “Upgrading the Firmware.”
N/A Maximum Delay auto resync max delay Specifies the maximum time, in minutes, the phone waits
past the scheduled time before starting a checksync.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
N/A Days auto resync days Specifies the amount of days that the phone waits between
checksync operations.
Note:
A value of 0 causes the phone to checksync every time the
clock reads the proper time. A value of 1 forces the phone to
wait 24 hours prior to doing the first checksync.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
XML Push Server List (Approved IP Addresses)
N/A XML Push Server List
(Approved IP Addresses)
xml application post list The HTTP server that is pushing XML applications to the IP
phone.
For more information, see Chapter 5, the section, “XML Push
Requests” on page5-204.
Parameter In
IP Phone UI
Parameter in
Mitel Web UI
Parameters in Configuration
Files
Description