Installation guide

Administrator Level Options
41-001561-00 REV00 – 10.2014 3-45
Download Server HTTPS Server https server The HTTPS server’s IP address. This will become effective
after this configuration file has been downloaded into the
phone.
Optional:
You can also assign an HTTPS relative path to the HTTPS
server. See the next parameter (https path).
For more information, see Chapter 4, “Configuration Server
Protocol” on page4-80.
Download Path HTTPS Path https path Specifies the path name for which the configuration files
reside on the HTTPS server for downloading to the IP Phone.
If the IP phone’s configuration and firmware files are located
in a sub-directory beneath the server’s root directory, the rel-
ative path to that sub-directory should be entered in this
field.
For more information, see Chapter 4, “Configuration Server
Protocol” on page4-80.
Download Port HTTPS Port https port Specifies the HTTP port that the server uses to load the con-
figuration to the phone over HTTP.
For more information, see Chapter 4, “Configuration Server
Protocol” on page4-80.
Auto-Resync Settings
N/A Mode auto resync mode Enables and disables the phone to be updated automatically
once a day at a specific time in a 24-hour period. This param-
eter works with TFTP, FTP, and HTTP servers.
Notes:
• If a user is accessing the Mitel Web UI, they are not
informed of an auto-reboot.
• Any changes made using the Mitel Web UI or the IP phone
UI are not overwritten by an auto-resync update. Auto-
resync affects the configuration files only. However, the
settings in the Mitel Web UI take precedence over the IP
phone UI and the configuration files.
• The resync time is based on the local time of the IP phone.
• If the IP phone is in use (not idle) at the time of the resync
check, the reboot occurs when the phone becomes idle.
• The automatic update feature works with both encrypted
and plain text configuration files.
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
N/A Time (24-hour) auto resync time Sets the time of day in a 24-hour period for the IP phone to
be automatically updated. This parameter works with TFTP,
FTP, and HTTP servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When selecting a value for this parameter in the Mitel Web
UI, the values are in 30-minute increments only.
• When entering a value for this parameter using the config-
uration files, the value can be entered using minute values
from 00 to 59 (for example, the auto resync time can be
entered as 02:56).
For more information, see Chapter 8, the section, “Using the
Auto-Resync Feature” on page8-5.
Parameter In
IP Phone UI
Parameter in
Mitel Web UI
Parameters in Configuration
Files
Description