Installation guide

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes
56
Entering Credentials for Broadsoft XSI Services
Before the BroadSoft XSI Call Logs service can be utilized, user credentials (i.e. username and
password) for BroadSoft XSI will need to be entered using the phone’s UI by navigating to the
Options List > Credentials menu.
Use the following procedure on the phone’s UI to enter user credentials.
1. Press on the phone to enter the Options List.
2. Navigate to the Credentials option and press the 4 Enter key.
3. Use the 2 key to navigate to the BroadSoft XSI option and press the 4 Enter key.
4. Press the 2 key to highlight the Username field and press the 4 Enter key.
5. Use the dialpad keys to enter in your username and press the 4 Set key when finished.
6. Press the 2 key to highlight the Password field and press the 4 Enter key.
7. Use the dialpad keys to enter in your password and press the 4 Set key when finished.
8. Press the key to exit the Options List.
DEFAULT VALUE 80 (when protocol used is HTTP)
443 (when protocol used is HTTPs)
RANGE Any valid port
EXAMPLE xsi port: 8080
PARAMETER
xsi calllogs enabled
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION Enables or disables XSI Call Log functionality.
FORMAT Boolean
DEFAULT VALUE 0 (Disabled)
RANGE 0 (Disabled)
1 (Enabled)
EXAMPLE xsi calllogs enabled: 1
PARAMETER
xsi port
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg