Installation guide

Additional Information
49
Configuring the Audio Mode Using the Configuration Files
Use the following parameter to configure the audio mode of the phone:
Configuring the Audio Mode Using the Phone UI:
Use the following procedure to configure the audio mode using the phone:
1. Press on the phone to enter the Options List.
2. Navigate to the Audio > Audio Mode option and press the button or Select softkey.
3. Use the 5 and 2 keys to scroll through and highlight the desired audio mode. Valid values
are:
• Speaker (default)
• Headset
• Speaker/Headset
• Headset/Speaker
4. Press the Save softkey to save your changes.
PARAMETER
audio mode
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION Allows you to configure how the button on the SIP phone operates.
FORMAT Integer
DEFAULT VALUE 0
RANGE 0. Speaker - This is the default setting. Calls can be made or received using
the handset or handsfree speakerphone. In handset audio mode,
pressing the button on the phone switches to handsfree
speakerphone. In Speaker audio mode, lift the handset to switch to the
handset.
1. Headset - Choose this setting if you want to make or receive all calls
using a handset or headset. Calls can be switched from the handset to
headset by pressing the button on the phone. To switch from the
headset to the handset, lift the handset.
2. Speaker/Headset - Incoming calls are sent to the handsfree
speakerphone first when the button is pressed. By pressing the
button again, you can switch back and forth between the
handsfree speakerphone and the headset. At anytime, lifting the handset
switches back to the handset from either the handsfree speakerphone or
the headset.
3. Headset/Speaker - Incoming calls are sent to the headset first when the
button is pressed. By pressing the button again, you can
switch back and forth between the headset and the handsfree
speakerphone. At anytime, lifting the handset switches back to the
handset from either the headset or the handsfree speakerphone.
EXAMPLE audio mode: 3