Installation guide

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes

For the 6865i SIP Phone:

1. Press the Options key, the 2 navigation key, and then the Enter key to enter the Call

Forward menu

Press the Call Forward programmable key.

2. Press the 2 navigation key three times to select Forward Filtering.

3. Press the Change key to enter the Call Forward Mode Forward Filtering menu.

4. Press the 2 navigation key to highlight the Call Forward State menu.

5. Press the Change key to enter the Call Forward State menu.

6. Press the Next key to toggle the Call Forward State option from ON to OFF.

7. Press the Set key.

8. Press the Done key.

9. Press the Confirm key to apply the changes.

An X will be displayed beside Fwd Filtering indicating call forwarding of all filtered calls is

to be deactivated.

10. Press the Done key again.

11. Press the Confirm key again.

12. Press the button to return to the idle screen.

The “CFWD Filtering” message will be removed from the idle screen and the MWI and (if

configured) Call Forward softkey LEDs will turn off indicating Forward Filtering is

deactivated.

For the 6867i and 6869i SIP Phones:

1. Press the Options key and then navigate to the Call Forward menu

Press the Call Forward softkey.

2. Press the 2 navigation key until you reach the On checkbox beside the Forward Filtering

number field.

3. Press the button.

The checkmark will be removed indicating call forwarding of all filtered calls is to be

deactivated.

4. Press the Save key to save your changes.

The Call Forward icon will be removed from the idle screen status bar and the MWI

and (if configured) Call Forward softkey LEDs will turn off indicating Forward Filtering is

deactivated.