Installation guide

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes
22
SIP FEATURES
CONFIGURABLE SIP NO RTP PACKET TIMEOUT PERIOD
A new parameter ("sip no rtp timeout") has been introduced in Release 4.0.0 SP1. This
parameter allows Administrators the ability to define a timeout period (in seconds) whereby if
no RTP packets (i.e. audio stream) are received in the defined amount of time, the phone will
send a BYE request, thus releasing the call and returning the home/idle screen.
Configuring the SIP No RTP Packet Timeout Period
Use the following parameter to configure the SIP no RTP packet timeout period:
Notes:
1. The default timeout for this parameter is 60 seconds.
2. Defining the parameter as "0" disables the feature.
PARAMETER
sip no rtp timeout
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION Specifies the timeout period (in seconds) whereby if no audio stream (i.e.
RTP packets) is received in the defined amount of time, the phone will send
a BYE request, thus releasing the call and returning the home/idle screen.
FORMAT Integer
DEFAULT VALUE 60 (seconds)
RANGE 0 (Disabled) - 2147483647 (seconds)
EXAMPLE sip no rtp timeout: 240