Installation guide

Additional Information
19
OPTION TO ENABLE/DISABLE REAL-TIME TRANSPORT CONTROL PRO-
TOCOL (RTCP)
The "rtcp enabled" parameter has been introduced in Release 4.0.0 SP1 allowing
Administrators the ability to manually enable or disable RTCP. Defining the parameter as "0"
disables the feature,
while "1" enables the feature. RTCP is enabled (i.e. "1") by default.
Enabling/Disabling RTCP Functionality
Use the following parameter to manually enable/disable RTCP functionality:
PARAMETER
rtcp enabled
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION Enables or disables Real-Time Transport Control Protocol (RTCP)
functionality.
FORMAT Boolean
DEFAULT VALUE 1 (Enabled)
RANGE 0 - 1
0 (Disabled)
1 (Enabled)
EXAMPLE rtcp enabled: 0